Ships nationwide from Rock Hill, SC · Local service across the Carolinas
Mon-Fri 7:00-5:00 · 803-981-3651
PiedmontIndustrial SalesCartCall for a quote
GA18, 25 HP Rotary Screw Air Compressor with Dryer, tankless, 208-230/460/3/60, 125 PSI

Asset: Atlas Copco

Atlas Copco
8153656817

GA18, 25 HP Rotary Screw Air Compressor with Dryer, tankless, 208-230/460/3/60, 125 PSI

$27,617
Call to order: 803-981-3651

Straight answers on sizing, phase, and freight: five minutes on the phone, no runaround.

Covered by the manufacturer's written warranty, not a warranty of ours. For a free copy before you buy, call 803-981-3651.

25
HP
109
CFM
132
Max PSI
  • 25 HP
  • 109 CFM
  • 132 PSI max
  • Old part no. 8153656650

About this product

Description supplied by the manufacturer. Any claim or guarantee in it is the manufacturer's to honor, and we will help you contact them.

The Atlas Copco GA18 FF (8153656650) is an oil-injected rotary screw air compressor rated at 25 hp (18.5 kW), supplied as a floor-mounted, air-cooled unit for 60 Hz power. It is a full-feature model, which means a refrigerant air dryer and a water separator are built into the same enclosure, so the machine produces clean, dry compressed air ready to feed straight into your air network without a separate dryer standing alongside it.

It is rated at a design pressure of 125 psi (8.6 bar), which suits workshops and light-to-medium industrial plants running air tools, production lines, pneumatic equipment and general shop air. As an oil-injected screw compressor it is built for continuous, 100 percent duty-cycle operation, making it a practical choice for sites that need air for hours at a stretch; screw and piston machines each suit different duties, so the right choice comes down to how you run it rather than one type being better than the other.

In an oil-injected screw compressor, oil is injected into the compression element to seal, cool and lubricate the two rotors as they compress the air, and the oil is then separated back out before the air leaves the machine. The GA18 FF uses Atlas Copco RDX (Roto Duty Extend) synthetic compressor oil and holds about 3.2 US gallons (12.2 liters). The integrated refrigerant dryer chills the compressed air to condense out moisture as condensate, the water that would otherwise collect in your piping and tools, and an automatic drain with a 1/4-inch (6.35 mm) outlet connection discharges it without anyone opening a valve by hand.

The compressor is managed by an Atlas Copco Elektronikon controller, which handles start, stop and pressure regulation, shows service and warning indications, detects faults and shuts the unit down to protect it. The drive is an IE3 motor, meaning it meets a premium international efficiency class that lowers running cost over the life of the compressor, and it is totally enclosed and fan-cooled to stand up to a dusty workshop environment.

It runs on a three-phase 60 Hz supply and is a tri-voltage unit rated for 460 V operation. It arrives ready to connect, with a single compressed-air outlet and a compact frame roughly 70 inches (1775 mm) long and 48 inches (1220 mm) tall that a forklift can reposition easily. Being air-cooled, it needs a ventilated space and will accept inlet air up to 115 °F (46 °C), and at a mean sound level of 67 dB(A) it is quiet enough to sit close to where the air is used.

The GA18 FF sits in our oil-injected screw 20 to 40 hp (15 to 30 kW) fixed-speed full-feature range, and it is built in Italy.

Features

  • Oil Injected Screw Compressor, Air Cooled
  • Capacity: 109 CFM @ 125 PSI
  • Motor: 25HP, IE3 TEFC Motor
  • Voltage: 208-230/460V/3ph/60Hz
  • 129 PSI Maximum Operating Pressure
  • Advanced Microprocessor Control: Elektronikon Swipe
  • Long Life RDX (Roto Duty Extend) Synthetic Oil
  • Full Feature Model: Integrated refrigerant dryer
  • Footprint: 70"L x 33"W x 48"H

Full specifications

19 specs
HP25
CFM109
Phase3
FamilyGA 18 FF FM CAI (2019)
SeriesGA15-30
ControlMK5 Touch
CoolingAir cooled
Max PSI132
Voltage208-230/460 V
MountingFloor Mounted
ShippingShips direct from Atlas Copco
Frequency60 Hz
Each Weight1232 LBS
Noise Level67 dB(A)
Product TypeRotary Screw Air Compressor
Old Part Number8153656650
Factory Start-UpAvailable, priced per install (call for a quote)
Integrated DryerYes
Dimensions (L x W x H)69.88 x 30.71 x 48.03 in

More rotary screw compressors

Not seeing the size you need?

The full book is longer than this page. Call: if your shop needs it, it's a phone call away from your dock.

Call 803-981-3651Fleet & export quotes