Ships nationwide from Rock Hill, SC · Local service across the Carolinas
Mon-Fri 7:00-5:00 · 803-981-3651
PiedmontIndustrial SalesCartCall for a quote
G5, 7.5 HP Rotary Screw Air Compressor with Dryer, 53 gal air tank, 230/1/60, 116 PSIG5, 7.5 HP Rotary Screw Air Compressor with Dryer, 53 gal air tank, 230/1/60, 116 PSI, view 2

Asset: Atlas Copco

Atlas Copco
8152103850

G5, 7.5 HP Rotary Screw Air Compressor with Dryer, 53 gal air tank, 230/1/60, 116 PSI

$10,924
Call to order: 803-981-3651

Straight answers on sizing, phase, and freight: five minutes on the phone, no runaround.

Covered by the manufacturer's written warranty, not a warranty of ours. For a free copy before you buy, call 803-981-3651.

7.5
HP
29.2
CFM
112
Max PSI
  • 7.5 HP
  • 29.2 CFM
  • 53-gal tank
  • 112 PSI max

About this product

Description supplied by the manufacturer. Any claim or guarantee in it is the manufacturer's to honor, and we will help you contact them.

The Atlas Copco G5 FF (8152103850) is an oil-injected rotary screw air compressor with an integrated refrigerant dryer, mounted on its own air receiver (tank) so it arrives as a compact, ready-to-run package. It runs on a single-phase 230 V, 60 Hz supply and is driven by a 7.5 hp (5.5 kW) motor, making it a practical fixed-speed screw air compressor for small workshops and growing businesses.

Inside, two precision rotors form the compression element known as the airend, and oil is injected into it to seal, cool and lubricate the rotors before being separated back out of the air stream, leaving a typical oil carry-over of just 5 mg/m³ in the compressed air. Because this is a Full Feature (FF) model, a refrigerant dryer is built in: it chills the compressed air so that water vapor turns to liquid (condensate) and is drained away, delivering the dry, clean air that spray painting, woodworking and drilling depend on.

The G5 FF has a design pressure of 109 psi (7.5 bar) and is air-cooled, so no cooling water is required. Its IE3 motor (a premium-efficiency class that helps hold down running costs) drives the airend through a Direct-On-Line starter. Lubrication uses Atlas Copco Roto-Xtend Duty synthetic fluid with an oil capacity of 0.85 US gallons (3.2 liters), and everyday operation is managed by the Electronikon Basic microprocessor controller, which handles start, stop and pressure settings. Its electrical components carry UL/cUL approval and its mechanical (pressure) components are ASME-approved.

Built for continuous duty, it operates in ambient temperatures from 34 °F to 115 °F (1 °C to 46 °C), with some derating of output above 3,280 ft (1,000 m) of altitude. Sound output is a quiet 65 dB(A). It is made in Italy.

To be sure the G5 FF suits your operation, check that your compressed-air piping matches its discharge outlet and that your electrical supply can carry the load on the single-phase 230 V connection before installation.

Features

  • Oil Injected Screw Compressor, Air Cooled
  • Tank Mounted
  • Capacity: 29.2 CFM @ 109 PSI
  • Motor: 7.5HP, IE3 TEFC Motor
  • Voltage: 230V/1ph/60Hz
  • 116 PSI Maximum Operating Pressure
  • Microprocessor Control: Electronikon Basic
  • Remote control/monitoringVia AIRKeeper
  • Long Life RDX (Roto Extend) Synthetic Oil
  • Full Feature Model: Integrated refrigerant dryer
  • Footprint: 57"L x 27"W x 50"H

Full specifications

17 specs
HP7.5
CFM29.2
Phase1
FamilyG 5 FF TM 200 CAI (2021)
SeriesG2-7
ControlBasic control
CoolingAir cooled
Max PSI112
Voltage230 V
MountingTank Mounted
Frequency60 Hz
Tank Size53
Each Weight496 LBS
Noise Level65 dB(A)
Product TypeRotary Screw Air Compressor
Integrated DryerYes
Dimensions (L x W x H)56.3 x 26.18 x 49.61 in

More rotary screw compressors

Not seeing the size you need?

The full book is longer than this page. Call: if your shop needs it, it's a phone call away from your dock.

Call 803-981-3651Fleet & export quotes